| display 1 |
Drive standby |
| display 2 |
Drive accelerate |
| display 3 |
Drive speed agree |
| display 4 |
Drive decelerate |
The drive will Trip when operating conditions outside it's specified
limits are reached.
The EI-MINI has 6 protection functions.
|
| display 5 |
OL. Motor current output greater than potentionmeter
THRY setting, for a minimum time of 60 seconds. |
| display 6 |
OC. Instantaneous over current |
| display 7 |
OV. DC link over voltage (>=410 VDC) |
| display 8 |
UV. DC link under voltage (<=180 VDC)
|
| display 9 |
OH. Drive Temperature Low and High (<= -5ºC or
23ºF) (>=80ºC or 176ºF) |
Under these conditions, the drive will Trip and will display as error
number and flash. If the fault condition persists, DC Link voltage
or Drive temperature is too low or too high, then the drive cannot
be Reset. When the fault condition is cleared, the drive may be Reset. |
